“VELOFIX” BIKE RACK
On vehicles equipped this accessory,
the rear bumper is fitted with two flaps
covering the mounting points for the
bike rack and an electrical socket 2 lo-
cated underneath the vehicle.
Each flap is protected by a blanking
cover 1.
Accessing the mounting
points
Unclip the blanking cover on each side
of the rear bumper.
For vehicles not fitted with blank-
ing covers 1, contact your approved
Dealer.
Bike rack permissible load: 30 kg.
Refer to the manufacturer’s instruc-
tions for information on how to fit
and use the bike rack.
Please keep these instructions with
the rest of the vehicle documenta-
tion.
If there is a bike rack light operating
fault, contact your approved Dealer
as soon as possible.
1
2
1
To Next Page
Loading...
