SEAT BELTS (2/4)
If your seat belt is completely jammed,
pull slowly, but firmly so that just over
3 cm unwinds. Allow it to return slightly
before attempting to unwind it again.
If there is still a problem, contact an ap-
proved dealer.
ç
Seat belt reminder
warning light
This warning light on the instrument
panel or dashboard goes out to let you
know that the seat belt has been cor-
rectly fastened.
Unlocking
Press button 4 on catch 5 and the seat
belt will be rewound by the inertia reel.
Guide the buckle to help the operation.
Adjusting the height of the
seat belt
Move button 6 to select the position you
require so that chest strap 1 is worn as
described above.
Make sure that the seat belt is locked
in position correctly after you have ad-
justed it.
To fasten
Unwind the belt slowly and smoothly
and ensure that buckle 3 locks into
catch 5 (check that it is locked by pull-
ing on buckle 3).
If the belt jams before it clicks in, allow
it to return before attempting to unwind
it again.
6
1
4
5
3
5
To Next Page
Loading...
Need help?
General
