SEAT BELTS (3/4)
Rear side seat belts 7
The belts are locked, unlocked and
adjusted in the same way as the front
belts.
Rear centre belt
Unwind belt 9 slowly from its housing,
then fasten buckle 8 into the corre-
sponding black catch 11.
Fasten sliding buckle 10 into the corre-
sponding red catch 12.
Check that the rear seat
belts are positioned and
operating correctly each
time the rear bench seat is
moved.
7
9
10
8
9
11
12
Make sure that the rear
bench seats are locked in
position properly so that the
seat belts will operate effi-
ciently. Refer to the information on
the “Rear bench seats” in Section 3.
To Next Page
Loading...
