Refit connector 4 or 6.
Do not touch the bulb glass. Hold it
by its base.
Refit clip 3 or 7, then cover C or D.
Dipped beam/main beam
headlights
Remove cover C or D.
Remove connector 4 or 6 from the bulb
concerned.
Unclip clip 3 or 7.
Replace the bulb.
Bulb type: only use anti UV 55W bulbs
to ensure the plastic glass on the head-
lights is not damaged.
5 →H7 or H1 depending on the ve-
hicle
2 →H1
HALOGEN HEADLIGHTS: changing bulbs (continued)
The bulbs are under pres-
sure and can break when
replaced.
Risk of injury.
The engine may be hot
when carrying out opera-
tions in close proximity. In
addition, the engine cooling
fan can come on at any moment.
Risk of injury.
7
6
D
C
4
3
2
5