bulbs
changing .........................................(up to the end of the DU)
fog lights ...............................................(up to the end of the DU)
changing a bulb ....................................(up to the end of the DU)
lights
additional ........................................(up to the end of the DU)
lights
fog lights .........................................(up to the end of the DU)
lights
front .................................................(up to the end of the DU)
lights:
fog lights .........................................(up to the end of the DU)
bulbs
changing .........................................(up to the end of the DU)
HEADLIGHTS: additional/front fog lights
Front fog lights 1
Because it is sometimes necessary to
remove the protectors (bumper), you
are advised to have your bulbs re-
placed by an Approved dealer.
Bulb type: H11.
Additional lights
If you wish to fit fog lights or long range
headlights to your vehicle, consult an
approved Dealer.
Any operation on (or modi-
fication to) the electrical
system must be performed
by an approved Dealer
since an incorrect connection might
damage the electrical equipment
(harness, components and in partic-
ular the alternator). In addition, your
Dealer has all the parts required for
fitting these units.
Vehicles with cornering lights
2
Due to their reduced accessibility,
(sometimes requiring the removal of
bodywork or mechanical components)
we advise you to have your bulbs re-
placed by an approved Dealer.
Bulb type: H1.
1
2
The engine may be hot
when carrying out opera-
tions in close proximity. In
addition, the engine cooling
fan can come on at any moment.
Risk of injury.