AUTOMATIC GEARBOX (4/4)
Operating faults
– When driving, if the message
“Check gearbox” and the
©
warning light appear on the instru-
ment panel, this indicates a fault.
Contact your approved Dealer as
soon as possible.
– When driving, if the message
“Gearbox overheating” appears on
the instrument panel, drive at a mod-
erate speed and avoid leaving the
lever in the D (or R) position, where
traffic conditions allow: always return
to the N position when you stop.
Contact your approved Dealer as
soon as possible.
– If a vehicle with an automatic
gearbox breaks down, refer to the
information on “Towing” in Section 5.
When setting off, if the lever is locked
in position P even though you are de-
pressing the brake pedal, the lever can
be released manually. To do this, unclip
the base of the lever, press recess 6,
visible on the gear lever gaiter, and un-
locking button 2 on the lever.
6
2
To Next Page
Loading...
