AUTOMATIC CLIMATE CONTROL (continued)
Varying the ventilation speed
In automatic mode, the system uses
the most suitable amount of air to reach
and maintain the desired comfort level.
Automatic mode is switched off by
pressing buttons 9 and 11.
These buttons allow you to increase
or decrease ventilation speed. If you
set the ventilation speed to zero, the
system switches off.
Switching air conditioning on
or off
In automatic mode, the system switches
the air conditioning system on or off,
depending on the climate conditions.
Exit automatic mode by pressing
button 3: the AUTO warning light on
display 5 goes out.
Button 3 activates (display warning
light comes on) or stops (warning light
goes out) the air conditioning function.
Note: the Clear View function auto-
matically activates the air condition-
ing system (indicator light on). Press
button 6 to return to automatic mode.
In automatic mode, in cold weather,
the ventilation will not start imme-
diately at maximum power but will
increase progressively until the
engine temperature is warm enough
to heat the passenger compartment
air. This may take from a few sec-
onds to several minutes.
3
11
9
5 6
To Next Page
Loading...
