Then push the front 3 of the cushion A
in order to lock the seat base.
To raise the seat base
Proceed in reverse order.
Lower the bench seat cushion A in such
a way as to position the rear section of
the seat base 1 under the seatback.
FIXED REAR BENCH SEAT (2/2)
1
1
3
A
To raise the seatback
Proceed in reverse order.
Refit the seatback and click it back into
place.
When refitting the seat-
back, make sure it is cor-
rectly locked in place.
If seat covers are fitted,
make sure these do not prevent the
seatback latch from locking in.
Make sure that the seat belts are
positioned correctly.
Reposition the headrests.
When moving the rear
seats, ensure that nothing
obstructs the anchorage
points (passenger’s arm or
leg, a pet, gravel, cloth, toys, etc.).
Allow the bench seat to turn
on its axis naturally with-
out forcing it, guiding it as it
lowers onto the floor.
To Next Page
Loading...
