WINDSCREEN WASH/WIPE (2/2)
Windscreen washers,
headlight washers
(depending on vehicle)
With the ignition on, pull stalk 1 to-
wards you.
Headlights off
A short press triggers one sweep cycle
of the wiper.
A longer press triggers three sweeps
followed by a final sweep after several
seconds.
Headlights on
The headlight washers will be activated
at the same time.
In frosty weather, make sure that
the wiper blades are not stuck by ice
(risk of motor overheating).
Keep an eye on the condition of the
blades. Replace the wiper blades as
soon as they begin to lose efficiency
(approximately once a year).
Clean your windscreen regularly.
If you switch off the ignition before
switching off the windscreen wiper
(position A) the blades will stop at
random on the windscreen.
1
A
D
B
C
When working in the engine
compartment, ensure that
the windscreen wiper stalk
is in position A (park).
Risk of injury.
Before any action on the
windscreen (washing the
vehicle, de-icing, cleaning
the windscreen, etc.) return
stalk 1 to position A (park).
Risk of injury and/or damage.
To Next Page
Loading...
Need help?
General
