2.8
“Work”
This menu can be used to start
navigating towards your work lo-
cation.
When you select “Work” from
the “Destination” menu for the
first time, the system asks you to
save the address of your place of
work by selecting GPS Position,
Address, Address book, “On the
map” or “Coordinates”.
Note: You can change your
“Home” and “Work” at any time
by selecting “Navigation” from the
main menu, then “Settings”.
“Coordinate”
This function allows you to define
a destination using coordinates
(latitude and longitude).
ENTERING A DESTINATION (3/6)
For safety reasons, carry
out these operations when
the vehicle is stationary.
Categories
(service station/car park/restau-
rant/accommodation)
Search for points of interest by
selecting categories from the
“Points of interest” menu.
On this screen, you can launch
a quick search using four types
of preset POIs:
– “Petrol Station” along a
route, if there are any.
– “Parking” near the destina-
tion, if there are any.
– “Restaurant” along a route,
if there are any.
– “Accommodation” near the
destination, if there are any.
If you currently do not have
a route or destination, these
POIs are searched around your
current or last known position.
“Address book”
You can save addresses in the
address book and use them as a
destination at a later time.
“Home”
This menu can be used to start
navigating your way home.
When you select “Home” in the
“Destination” menu for the first
time, the system asks you to save
your home address by select-
ing “GPS Position”, “Address”,
“Address book”, “On the map” or
“Coordinates”.
To Next Page
Loading...
