Renesas Starter Kit+ for RZ/T2M 3. Board Layout
R20UT4939EG0100 Rev. 1.00 Page 14 of 87
Apr 20, 2022
3.2 Board Dimensions
Figure 3-3 below gives the board dimensions and connector positions. All the through-hole connectors are on
a common 2.54mm pitch grid for easy interfacing.
Figure 3-3: Board Dimensions
(Unit: mm)
3.3 Component Placement
For placement details of individual components on the board, refer to section [10. Appendix].
To Next Page
Loading...
