Renishaw XL Series User Manual

XL laser system
Packaging material information
Packaging
component
Material
94/62/EC
code
94/62/EC
number
Kit outer box Cardboard - 70% recycled content PAP 20
XL-80 outer box Cardboard - 70% recycled content PAP 20
Accessories outer
box
Cardboard - 70% recycled content PAP 20
Tripod outer box Cardboard - 70% recycled content PAP 20
Optics outer box Cardboard - 70% recycled content PAP 20
Optics/accessories
packaging insert *
Cardboard - 70% recycled content PAP 20
Optics/accessories
plastic bags *
Low density polyethylene bag LDPE 4
Optics/accessories
packing foam *
Low density polyethylene LDPE 4
Optics/accessories
packing foam *
Polyurethane foam PUR 113
Optics/accessories
packing foam *
Polyurethane PU 7
Optics/accessories
bag *
high density polyethylene HDPE 2
Optics wax bag * Paper PAP 21
*optics and accessories are packed in various transits outers, specific kit
information can be obtained on request.
RoHS compliance
Compliant with EC directive 2011/65/EU (RoHS).
REACH
Information required by Article 33(1) of Regulation (EC) No. 1907/2006 (“REACH”)
relating to products containing substances of very high concern (SVHCs) is
available at:
www.renishaw.com/REACH
WEEE
The use of this symbol on Renishaw products and/or accompanying
documentation indicates that the product should not be mixed with
general household waste upon disposal. It is the responsibility of the
end user to dispose of this product at a designated collection point for
waste electrical and electronic equipment (WEEE) to enable reuse or
recycling. Correct disposal of this product will help to save valuable
resources and prevent potential negative effects on the environment.
For more information, please contact your local waste disposal service
or Renishaw distributor.
Legal information
International regulations and conformance
EC compliance
Renishaw plc declares that the XL system complies with the applicable directives,
standard and regulations. A copy of the full EC Declaration of Conformity is
available upon request.
In compliance with BS EN 61010-1:2010 the product is safe to use in the following
environmental conditions:
• Indoor use only
• Altitude up to 2000 m
• Maximum relative humidity (non-condensing) of 80% for
temperatures up to 31 °C decreasing linearly to
50% relative humidity at 40 °C
• Pollution Degree 2

Renishaw XL Series Specifications

General

Laser Wavelength	633 nm
Type	Laser interferometer
Measurement Range	Up to 80 meters
Accuracy	±0.5 ppm
Environmental Compensation	Automatic
Laser Source	HeNe laser
Interface	USB
Power Supply	External power supply unit