Renkforce 2203406 - Maintenance and Cleaning

73
15. Maintenance and Cleaning
The product requires no servicing apart from replacing the battery/rechargeable battery. Servicing or repair must only
be carried out by a specialist or specialist workshop. There are no parts that require maintenance by you inside the
product. Therefore, never open it (except for the procedure described in these operating instructions for inserting or
replacing the batteries/rechargeable batteries/).
Adry,softandcleanclothissufcientforcleaningtheproduct.Donotpushthehousingtoostrongly.Thiswilllead
to scratches.
Dust can easily be removed with a long-hair, soft and clean brush and a vacuum cleaner.
The outdoor sensor can be wiped off with a rag moistened with clean water.
Regularly check if any, e.g., leaves have collected in the collection funnel of the rain sensor and remove them.
Clean the brightness and light sensor and the solar module regularly (every 3 months recommended).
Never use any aggressive cleaning agents, cleaning alcohol or other chemical solutions for cleaning, since
these may damage the casing (discolouration) or even impair function.