KrosFlo® TFF System – Auxiliary Scale ACSS-60K
repligen.com 420-14871-002 Rev. 00
KrosFlo® TFF System – Auxiliary Scale
The KrosFlo® TFF System – Auxiliary Scale assembly and operation may vary based on application.
The instructions below are for general use. For questions about specific application set up or
customization, please contact your local Repligen representative.
Figure 1. KrosFlo® TFF - Auxiliary Scale components
1. Display and operations keypad
2. Weighing pan
1. General precautions
• Remove the contents from the packaging. If a part is missing, contact Repligen for
replacement
• Prior to the first use, carefully read this User Guide. Use the device only as intended
• Scales to be decommissioned must be decommissioned in accordance with valid legal
regulations
2. KrosFlo® TFF System - Auxiliary Scale
Table 1. Auxiliary scale parts
Part description Quantity
Figure 2. Auxiliary scale parts
1. ACSS-60K scale
2. 6’ Interface cable
1. Place the balance on a solid surface to ensure stability. Operate the balance in a room where
the temperature ranges between 10 - 40
o
C (50 - 104
o
F).
2. The balance must be positioned away from heat sources, magnetic fields, vibrations, and air
drafts to receive stable and repeatable results. Balance is to not to be used for explosive
materials.
To Next Page
Loading...
Need help?
General
