Resol DeltaSol SLL User Manual

en
31
InstallationIndications, functions and optionsMessages Commissioning Operation and function
BALAN 1
PUSH
hR 1 (2, 4)
Operating hours
Relays 1, 2, 4
DAYS
Operating days
MAXS1(… 4)
Maximum temperature
Sensors 1 … 4
MINS1(… 4)
Minimum temperature
Sensors 1 … 4
1
Operating hours counter
R (1, 2, 4)
Operating hours counter
The operating hours counter accumulates the solar operating hours of the relay
(h R1 / h R2 / h R4). Full hours are displayed.
The accumulated operating hours can be set back to zero (see page 20).
Operating days
Display of operating days since commissioning or last reset. The operating days
cannot be set back to zero.
Minimum and maximum temperatures
MAXS1(2, 3, 4)
Maximum temperatures at S1 … S4
MINS1(2, 3, 4)
Minimum temperatures at S1 … S4
Indication of the minimum and maximum temperatures at S1…S4.
The temperature indication can be set back to zero (see page 20).
2
System
Selecting the system
Each system has pre-programmed options and adjustments which can be activated
or changed respectively if necessary. Select the system  rst (see page 7).
1
Balance values
SYS 2
PUSH
SYS
Basic system
Adjustment range: 1 … 10
Factory setting: 1
BACK
PUSH
Adjustment level
2

Resol DeltaSol SLL Specifications

General

Brand	Resol
Model	DeltaSol SLL
Category	Controller
Language	English