en
23
InstallationIndications, functions and optionsMessages Commissioning Operation and function
7 Commissioning
When the hydraulic system is lled and ready for operation, connect the controller
to the mains.
The controller runs an initialisation phase in which all symbols are indicated in the
display. The Lightwheel
®
ashes red.
When the controller is commissioned or when it is reset, it will run a commis-
sioning menu after the initialisation phase. The commissioning menu leads the user
through the most important adjustment channels needed for operating the system.
Commissioning menu
The commissioning menu consists of the channels described in the following. In
order to make an adjustment, press the right button (✓). Ⓢ starts flashing and
the adjustment can be made. Con rm the adjustment with the right button (✓).
Turn the Lightwheel
®
, the next channel will appear on the screen.
Adjustment mode ashing
Operation
changing a value ashing
✓
✓
con rming a value not ashing
to the next parameter
1. Language:
Î Adjust the desired menu language.
Commissioning
2. Time:
Î Adjust the clock time. First of all adjust the hours,
then the minutes.
3. Daylight savings time adjustment:
Î Activate or deactivate the automatic daylight
savings time adjustment.
4. Date:
Î Adjust the date. First of all adjust the year, then the
month and then the day.
To Next Page
Loading...
Need help?
General
