Resol DL2 - Displaying the Remote Access; Basic Configuration; Finding the DL2 Datalogger by Means of the Devicediscoverytool; Changing the Web Interface Language

14
Installation Conguration Data export / CongurationWeb-Interface Eliminating errorsIndications
en
7.10 Displaying the remote access
In order to display the status of the remote access, proceed as follows:
Î In the main menu Status, select the submenu Remote access.
On the Remote access tab, the status of Local network access enabled? is
displayed.
On the Remote access over Internet tab, the status of Use VBus.net for re-
mote access? is displayed.
8 Basicconguration
In order to carry out the basic conguration, proceed as follows:
1. Find the DL2 Datalogger by means of the DeviceDiscoveryTool.
2. Change the Web interface language.
3. Change the live data screen language.
4. Change the user password.
5. Change the device name.
6. Change the time conguration.
7. Congure the automatic rmware update conguration.
8. Change the remote access password.
8.1 Finding the DL2 Datalogger by means of the DeviceDiscovery-
Tool
The DeviceDiscoveryTool is a software that displays Dataloggers that are connect-
ed directly or via the local network.
Note
The factory setting for both user name and password is admin.
Note
Starting the DeviceDiscoveryTool from the CD is possible under a Win-
dows operating system only.
To start the DeviceDiscoveryTool, Java (version 6 or higher) must be in-
stalled on the computer.
Starting the DeviceDiscoveryTool from the included CD
In order to start the DeviceDiscoveryTool from the included CD, proceed as follows:
1. Open the DeviceDiscoveryTool folder.
2. Start DeviceDiscoveryToolSetup.exe.
3. Conrm all following dialogues with OK
4. Click Start/Programs/RESOL/DeviceDiscoveryTool/DeviceDiscovery-
Tool.
All DL2 Dataloggers found are displayed.
5. Click the DL2 Datalogger to mark it.
6. Click Open.
A new window opens.
7. Enter user name and password.
The Home screen of the DL2 Web interface opens.
8.2 Changing the Web interface language
The Web interface can be run in different languages.
Î Click one of the small ags on the right-hand side of the Home screen, accord-
ing to the desired language:
• German
• English
• French
• Spanish
• Italian
The message Language selection successful! appears.
8.3 Changing the Live data screen language
In order to select the language of the Live data screen, proceed as follows:
1. In the main menu DeviceCong, select the submenu General.
2. On the General Conguration tab, in the dropdown menu Default Lan-
guage, select one of the following languages:
• Deutsch (de)
• English (en)
• Français (fr)
• Español (es)
• Italiano (it)
3. Click Saveconguration.
The message Congurationsavedsuccessfully! appears.