Resol DL2 - Changing the User Password; Changing the Device Name; Configuring Date and Time Information; Configuring Automatic Firmware Update Query Settings

15
InstallationData export / CongurationEliminating errors Conguration Web-Interface Indications
en
8.4 Changing the user password
In order to change the user password, proceed as follows:
1. In the main menu DeviceCong, select the submenu Users.
2. Select admin.
The admin tab opens.
3. Tick the Change password checkbox.
4. Enter the current password into the Current FTP password input eld.
The factory setting for the password is admin.
5. Enter the new password into the New password input eld.
6. Enter the new password into the Repeat new password input eld.
7. Click Saveconguration.
The Login window opens.
8. Enter the user name and the new password.
The message Congurationsavedsuccessfully! appears.
8.5 Changing the device name
Note
Choose a descriptive device name to facilitate identifying the DL2 Data-
logger in the network.
In order to change the device name, proceed as follows:
1. In the main menu DeviceCong, select the submenu General.
2. On the General Conguration
tab, enter the device name in the Device
Name
input eld.
Permitted characters are: letters, numbers, underscores.
3. In the Default Language dropdown menu, select the desired language.
4. Click Saveconguration.
The message Congurationsavedsuccessfully! appears.
8.6 Conguringdateandtimeinformation
The Date and Time Conguration determines where the DL2 Datalogger obtains
its date and time information.
The Date and Time Conguration can be set to the following adjustments:
• Dynamic (recommended): Date and time information are automatically syn-
chronised between the DL2 Datalogger and the NTP server.
• Static: The user manually assigns date and time information to the DL2 Data-
logger.
Synchronising time information automatically
In order to automatically synchronise time information, proceed as follows:
1. In the main menu DeviceCong, select the submenu General.
2. On the DateandTimeConguration tab, in the Time Zone dropdown
menu, select the desired time zone.
3. In the NTP synchronisation enabled? dropdown menu, select Ye s .
4. Enter the NTP server address.
Factory setting: eu.pool.ntp.org.
5. Click Save conguration.
The message Congurationsavedsuccessfully! appears.
Assigning time information manually
In order to manually assign the time information, proceed as follows:
1. In the main menu DeviceCong, select the submenu General.
2. On the DateandTime Conguration tab, tick the Manually set time
to checkbox.
3. Enter time information (day, month, year, hours, seconds).
4. Click Save conguration.
The message Congurationsavedsuccessfully! appears.
8.7 Conguringautomaticrmwareupdatequerysettings
The rmware is the internal software of the DL2 Datalogger. Through rmware
updates, the software will be improved in the following ways:
• Extended functional range
• Enhanced operation
• Customisation of the Web interface desktop
When automatic rmware updates are enabled (strongly recommended), the DL2
Datalogger will search for new rmware versions in regular intervals.
Note
Previous congurations are not affected by a rmware update.
Note
When there is no Internet connection, rmware updates can only be run
with an SD card.
See chap. 10 Firmware update with SD card, page 23.