Resol DL2 - 2 Included; 3 Installation

6
Installation Conguration Data export / CongurationWeb-Interface Eliminating errorsIndications
en
2 Included







If one of the items mentioned below is missing or defective, please contact your
distributor:

DL2 Datalogger, ready to plug in, including mains adapter and VBus
®
cable

Interchangeable mains adapter plugs (EURO, UK, USA, AUS)

Network cable (CAT5e, RJ45), 1 m

Wall plugs and screws

Terminal block for extending the VBus
®
cable

Service CD (incl. manual)

Manual (picture similar to original product)
3 Installation
ATTENTION!
ESD damage!
Electrostatic discharge can lead to damage to electronic com-
ponents!
Î Take care to discharge properly before touching the
inside of the device. To do so, touch a grounded sur-
face such as a radiator or tap!
ATTENTION!
Short circuit!
A short circuit can lead to damage to electronic components!
Î Close the housing before establishing the mains con-
nection!
If the mains adapter or its cable is damaged, it has to be replaced by an identical
mains adapter, which is available from the manufacturer or its customer service.
Do not use the device if it is visibly damaged!
The DL2 Datalogger comes with the mains adapter and the VBus
®
cable pre-con-
nected.
The housing does not have to be opened in order to mount the device.