Resol DL2 - Page 2

2
en
© 20210315_48003741_Datalogger_DL2_V2.monen.indd
Safety advice
Please pay attention to the following safety advice in order to avoid danger and
damage to people and property.
• Danger of electric shock: Do not use the device if it is visibly damaged.
• If the mains adapter or its cable is damaged, it has to be replaced by an identical
mains adapter, which is available from the manufacturer or its customer service.
The device must not be used by children or persons with reduced physical, sensory
or mental abilities or without any experience and knowledge. Make sure that chil-
dren do not play with the device!
Only connect accessories authorised by the manufacturer to the device.
Make sure that the housing is properly closed before commissioning the device.
Target group
These instructions are exclusively addressed to authorised skilled personnel.
Only qualied electricians should carry out electrical works.
Initial commissioning must be effected by authorised skilled personnel.
Authorised skilled personnel are persons who have theoretical knowledge and ex-
perience with the installation, commissioning, operation, maintenance, etc. of electric/
electronic devices.
Instructions
Attention must be paid to the valid local standards, regulations and directives!
Information about the product
Proper usage
The RESOL DL2 Datalogger is connected to RESOL controllers via the VBus
®
in-
terface. It enables logging of system data and parameterisation of a solar thermal
system.
• Use in dry interior rooms only.
• Avoid ambient temperatures lower than 0 °C or higher than 40 °C
• Do not expose to strong electromagnetic elds.
Improper use excludes all liability claims.
Any use beyond this is considered improper.
Proper usage also includes compliance with the specications given in this manual.
Note
Strong electromagnetic elds can impair the function of the device.
Î Make sure the device as well as the system are not exposed to strong
electromagnetic elds.
EU Declaration of conformity
The product complies with the relevant directives and is therefore
labelled with the CE mark. The Declaration of Conformity is available
upon request, please contact the manufacturer.
Scope of delivery
The scope of delivery of this product is indicated on the packaging label.
Storage and transport
Store the product at an ambient temperature of 0 … 40 °C and in dry interior
rooms only.
Transport the product in its original packaging only.
Cleaning
Clean the product with a dry cloth. Do not use aggressive cleaning uids.
Subject to technical change. Errors excepted.