21
7.5.2 Push button
Your hearing aid has a push button allowing you to use up to four dierent listening
programs. The list on page 2 tells which programs have been enabled.
1. Tap the push button to switch between programs.
2. You will then hear one or more beeps. The number of beeps indicates which
program you have selected (one beep = program one, two beeps = program
two, etc.).
3. When you turn the hearing aids o and then back on, they always return to
the default setting (program one and pre-set volume).
i
NOTE: If you have two hearing aids with the Synchronized Push Button enabled, program changes
to one hearing aid automatically repeat in the second hearing aid. When you change a program in
one hearing aid, it responds with one or more beeps. The same number of confirmation beeps in
the second aid follow.
400618011US-17.01-Rev.A.indd 21 25-01-2017 09:59:12
To Next Page
