ReSound LINX 3D - Connecting DAI; Disconnecting DAI

29
8.6.1 Connecting DAI
1. Align the tip of the DAI click-on adaptor with the groove just above the battery door and below
the model number.
2. Once in place, move the DAI click-on adaptor in the direction of the battery door.
3. Gently click the DAI click-on adaptor onto the hearing aid.
8.6.2 Disconnecting DAI
1. Press and hold the button on the front side of the DAI click-on adaptor.
2. Gently remove the DAI click-on adaptor from the hearing aid.
400618011US-17.01-Rev.A.indd 29 25-01-2017 09:59:13