ReSound LINX 3D User Manual

24
8.4 Phone Now
The Phone Now function automatically switches your present listening program to your telephone
program when a telephone receiver, equipped with a magnet, is close to your ear. When you remove the
telephone receiver from your ear, the hearing aid automatically returns to the previous listening program.
8.4.1 Placement of Phone Now magnets
Place Phone Now magnet on your telephone receiver to allow operation of the Phone Now function. In
order to place Phone Now magnet properly:
1. Clean the telephone receiver thoroughly.
2. Hold the telephone vertically, in a position similar to when making
a telephone call.
3. Place the magnets just below the telephone receiver. Make sure
not to cover the microphone or speaker openings. If necessary,
move the magnet to another position to improve ease of use and
comfort while speaking.
i
NOTE: If you are not satisfied with the strength of Phone Now, you
can reposition the Phone Now magnet or add additional Phone Now magnets.
NOTE: Prior to placing the magnet on the telephone or cell phone, use a recommended cleaning
agent to clean the telephone.
400618011US-17.01-Rev.A.indd 24 25-01-2017 09:59:12

ReSound LINX 3D Specifications

General

Model	LINX 3D
Wireless Connectivity	Yes
Bluetooth	Yes
App Compatibility	ReSound Smart 3D app
Directional Microphones	Yes
Noise Reduction	Yes
Feedback Cancellation	Yes
Fitting Range	Mild to severe hearing loss
Technology	Digital
Channels	17
Gain	Up to 70 dB
Battery Type	Rechargeable (selected models)
Style	Behind-the-Ear (BTE)
Frequency Range	100 Hz - 8 kHz
Battery Life	Varies by model and usage
Features	Spatial Sense
Type	Behind-the-Ear (BTE)
Water Resistance	IP68