ReSound LINX 3D User Manual

44
14.1 i Daily maintenance
It is important to keep your hearing aid clean and dry. On a daily basis, clean the hearing aids using a soft
cloth or tissue. In order to avoid damage due to humidity or excessive perspiration, the use of a drying kit
is recommended.
14.2 i Cleaning earmolds
1. Remove the earmold and attached tubing from
the hearing aids prior to cleaning.
2. Clean the earmold using a mild soap, and rinse
with lukewarm water.
3. After cleaning, dry earmolds thoroughly and
remove any residual water and debris from the
tubing utilizing an air bulb and wire loop.
Pull the earmold and device apart.
i
NOTE: Earmold tubing may become sti, brittle, or discolored over time. Contact your hearing care
professional regarding tube changes.
400618011US-17.01-Rev.A.indd 44 25-01-2017 09:59:15

ReSound LINX 3D Specifications

General

Model	LINX 3D
Wireless Connectivity	Yes
Bluetooth	Yes
App Compatibility	ReSound Smart 3D app
Directional Microphones	Yes
Noise Reduction	Yes
Feedback Cancellation	Yes
Fitting Range	Mild to severe hearing loss
Technology	Digital
Channels	17
Gain	Up to 70 dB
Battery Type	Rechargeable (selected models)
Style	Behind-the-Ear (BTE)
Frequency Range	100 Hz - 8 kHz
Battery Life	Varies by model and usage
Features	Spatial Sense
Type	Behind-the-Ear (BTE)
Water Resistance	IP68