27
8.5.2 HAC Telephone
The telecoil picks up the HAC telephone’s telecoil signal and converts it to sound.
To use the HAC telephone, follow these steps:
1. Switch your hearing aid to the Telecoil program.
2. Pick up the telephone and place a call or answer a call.
3. Hold the telephone behind your ear – close to the hearing aid, and tilt it slightly outwards.
4. Listen to the dial tone and move the telephone to get the best reception.
5. If needed, adjust the volume.
6. When you hang up, switch to a microphone program.
i
NOTE: If the phone has a poor telecoil signal, use the microphone program. To avoid whistling, do
not hold the handset too tightly against your ear.
400618011US-17.01-Rev.A.indd 27 25-01-2017 09:59:13
To Next Page
Loading...
