ReSound LINX 3D User Manual

28
Direct audio
8.6 Direct Audio Input (optional)
Your hearing aid is equipped with a Direct Audio Input facility. Direct Audio Input allows direct connec-
tion of sound sources, a radio, television or even school equipment, to your hearing aid. Often, this will
improve sound quality.
The sound source transmits to your hearing aid via a cable and a click-on device.
The hearing aid automatically detects the Direct Audio Input (DAI) source. The DAI supports the systems
for wireless use as well.
Your hearing aid professional can adjust your hearing aids to fit the mix between the digital audio input
and the microphones on your hearing aids. You may, e.g. select to lower the ambient sounds and amplify
the sounds from the transmitter.
This accessory connects to the bottom of the hearing aids. Once clicked into place, the hearing aids auto-
matically close the microphones and switch to DAI.
i
NOTE: DAI is not available for LT67. Available in 77, 88 models.
400618011US-17.01-Rev.A.indd 28 25-01-2017 09:59:13

ReSound LINX 3D Specifications

General

Model	LINX 3D
Wireless Connectivity	Yes
Bluetooth	Yes
App Compatibility	ReSound Smart 3D app
Directional Microphones	Yes
Noise Reduction	Yes
Feedback Cancellation	Yes
Fitting Range	Mild to severe hearing loss
Technology	Digital
Channels	17
Gain	Up to 70 dB
Battery Type	Rechargeable (selected models)
Style	Behind-the-Ear (BTE)
Frequency Range	100 Hz - 8 kHz
Battery Life	Varies by model and usage
Features	Spatial Sense
Type	Behind-the-Ear (BTE)
Water Resistance	IP68