33
Modulation level and speed can also be configured to your likes and needs. An additional feature can
be enabled by your hearing care professional that allows you to select predefined sounds that simulate
sounds from nature, such as breaking waves or running water.
If you have two wireless hearing aids that support ear-to-ear synchronization this functionality can be
enabled by your hearing care professional. This will cause the Tinnitus Sound Generator to synchronize
the sound in both hearing aids.
If your tinnitus troubles you only in quiet environments, your doctor, audiologist or hearing care profes-
sional can set the TSG Module so that it becomes audible exclusively in such surroundings. The overall
sound level can be adjusted via an optional volume control. Your doctor, audiologist or hearing care
professional will review with you the need for having such a control.
For hearing aids where ear to ear synchronization is enabled, your hearing care professional can also
enable environmental monitoring synchronization so that the TSG noise level is automatically adjusted
simultaneously in both hearing aids dependent on the background sound level. Additionally if the hearing
aid has a volume control, then the background noise level monitored by the hearing aid and the volume
control can be used simultaneously to adjust the generated noise level in both hearing aids.
9.2.3 TSG volume control
The sound generator is set to a specific loudness level by the hearing care professional. When switching
the sound generator on, the volume will have this optimal setting. Therefore, it might not be necessary to
control the volume (loudness) manually. However, the volume control provides the ability to adjust the
volume, or amount of stimulus, to the liking of the user.
400618011US-17.01-Rev.A.indd 33 25-01-2017 09:59:14
To Next Page
Loading...
