Response Biomedical RAMP READER - Using the SYSTEM SETTINGS Menu; Accessing the SYSTEM SETTINGS Menu

RAMP® System Operation
Operator’s Manual, RAMP
®
Reader 26
2.6 Using the SYSTEM SETTINGS Menu
The SYSTEM SETTINGS Menu allows controlled access to the following system settings:
1) SET MASTER P.I.N. – to edit the Master PIN.
2) SET CLOCK – to adjust the date and time.
3) DISABLE ID & P.I.N. – to enable or disable the User ID/PIN option.
4) EDIT USER ID/P.I.N. – to review and edit the User ID/PIN.
5) PRINT SETTINGS – allows for printing of the results after each test, and the ability to
include two additional lines of information on the printout.
6) TRANSFER USERS – to download User ID/PIN data to another RAMP
®
Reader.
7) ERASE MEMORY – to delete test results stored in the Reader memories, i.e., Sample,
LQC and IQC.
8) SET IQC TIMER – to set interval from 1-24 hours.
9) SET LQC TIMER – to set interval from 1-31 days.
10) RESET LQC TIMER – to set the LQC timer countdown.
11) TEST COUNTERS – maintains a record of the number of Sample, IQC and LQC tests
that the instrument has performed.
12) CONNECTIVITY – to allow the transfer of data to an external system.
13) ENABLE SOUND – to disable/enable the alert sounds of the system.
14) EXIT MENU – to return to RUN/OPTIONS screen.
2.6.1 Accessing the SYSTEM SETTINGS Menu
Press [Options], and scroll to the 5. SYSTEM SETTINGS prompt from the OPTIONS Menu. Press
[Enter] to select.
If the Master P.I.N. feature is enabled (Section 2.6.2), access to the SYSTEM Menu requires input of
a P.I.N. at this prompt:
When the correct Master P.I.N. is entered, full access to the SYSTEM Menu is permitted. By default,
the Master P.I.N. is disabled.
If no P.I.N. is entered, the screen reverts to the OPTIONS menu. If an incorrect P.I.N. is entered, a
P.I.N. IS INCORRECT! message is displayed. Pressing any key will display the following:
Press [Enter] to re-enter correct P.I.N. or press [▼] and [Enter] to select the P.I.N. override feature.
The following prompt is displayed:
CONTACT TECH SUPPORT
WITH PERMIT #: XXXXX
> RE-ENTER P.I.N.
OVERRIDE P.I.N.
ENTER MASTER P.I.N.:
_ **************