Response Biomedical RAMP READER - 1.4 How the RAMP System Works

To Next Page

To Previous Page

Introduction

Operator’s Manual, RAMP

Reader 3

1.4 How the RAMP

System Works

1.4.1 RAMP

Reader

The Reader is a scanning fluorometer and data analysis system used for the measurement of

fluorescence in various RAMP

immunoassay applications (Figure 1-1). The Reader can be

operated on battery power or powered via an AC adapter

1.4.2 RAMP

Assay/Test Kit Components

The Kits are used in conjunction with the Reader to detect the concentration of analyte in an aqueous

sample. There are several components associated with the Kits, including a Lot Card and applicable

sample handling supplies. For more information on the Kit, components, operation and sample

handling for the assay, refer to the Test Kit Instructions for Use.

NOTE: The Reader is only designed to be used with Kits manufactured by Response

Biomedical Corporation.

1.4.3 Accessories

There are a number of optional accessories that can be purchased for use with the RAMP

System.

All items are available from Response Biomedical. Please contact your local distributor or Response

Biomedical Customer Service (Appendix C) if you require any of the following accessories

1.4.3.1 Printer

A printer can be connected to the Reader via the RS-232 serial port on the back panel, and is used to

create a hard copy of the assay results. The recommended printer is the Citizen iDP 3110.

1.4.3.2 Barcode Wand

A barcode wand can be connected to the Reader via the back panel and used to enter sample

identification or operator identification into the Reader instead of using the Reader keypad. The

barcode wand is capable of reading UPC, Codabar, EAN, ISBN or similar barcode information.

1.4.3.3 Computer Connections

Detailed instructions for enabling assay results to be output to a computer can be obtained from

Response Biomedical Technical Support.

1.4.3.4 Reader to Reader Cable

By linking Readers together with the appropriate cables, User ID (user identification) and P.I.N.

(personal identification number) information can be transferred to another Reader. Appendix A

provides more details.