Retsch GM 200 - Electromagnetic Compatibility (EMC); Rated Power; Motor Rotation Speed; Dimensions and Weight

Technical Data
14
Example 2:
Container:
Glass container with gravity lid
Grinding body:
Knife of stainless steel
Feed material:
Cheese (~ 20 x 20 mm)
Feed quantity:
100 g
Speed:
10 000 rpm
At these operating conditions, the workplace related equivalent continuous sound level
L
eq
= 73.9 dB(A).
3.4 Electromagnetic Compatibility (EMC)
 EMC class according to DIN EN 55011: A
3.5 Rated Power
~ 1 000 W (VA)
3.6 Motor Rotation Speed
The motor rated speed depends on the type of grinding:
 Cutting: 2 000 – 10 000 rpm (in steps of 500 rpm)
 Cutting with Boost function: 14 000 rpm
 Hit and impact grinding: 2 000 – 4 000 rpm (in steps of 500 rpm)
3.7 Dimensions and Weight
 Height: 392 mm
 Width: 350 mm
 Depth: 275 mm
 Weight: ~ 10 kg (without grinding container, without knife insert)
3.8 Required Floor Space
CAUTION
C5.0047
Risk of injury caused by the device falling down
Incorrect installation of the device
 Due to its weight, the device can cause injuries if it falls down.
 Only operate the device on a sufficiently large, strong and stable
workstation.
 Ensure that all of the device feet are securely supported.
 Height with open hood: ~ 540 mm
 Depth with open hood: ~ 450 mm
 Width of the base: 350 mm
 Depth of the base: 450 mm
No safety distances required.
Location requirements:
The device must be placed on a vibration-free and stable surface.