Retsch GM 200 - Packaging, Transport, and Installation

Packaging, Transport and Installation
16
4 Packaging, Transport and Installation
WARNING
W2.0000
Risk of cuts
Falling machine or parts of the machine
 The machine may fall down while it is being unpacked, and the blade
insert can lead to cuts.
 Remove the machine carefully from the packaging.
 Place the machine on a firm stand.
4.1 Packaging
The packaging has been adapted to the mode of transport. It complies with the generally
applicable packaging guidelines.
NOTICE
N3.0001
Complaint or return
Keeping the packaging
 Inadequate packaging and insufficient securing of the device can
jeopardise the warranty claim in the event of a complaint or return.
 Keep the packaging for the duration of the warranty period.
4.2 Transport
NOTICE
N4.0017
Damage to components
Transport
 Mechanical or electronic components may be damaged during transport.
 The device must not be knocked, shaken or thrown during transport.
NOTICE
N5.0014
Complaints
Incomplete delivery or transport damage
 The forwarding agent and Retsch GmbH must be notified immediately in
the event of transport damage. It is otherwise possible that subsequent
complaints will not be recognised.
 Please check the delivery on receipt of the device for its
completeness and intactness.
 Notify your forwarding agent and Retsch GmbH within 24 hours.