Retsch GM 200 - Controlling the Device; Control Panel Overview

Controlling the Device
31
7 Controlling the Device
7.1 Operating Controls, Displays and Functions
Fig. 9: Control panel areas
Element
Description
Function
B1
Navigation
Selection of the operating modes "Manual",
"Programme" and "Sequence". Access to the menu
"Settings"
B2
Settings and display of
parameters
Settings of grinding parameters and display of
parameters during the grinding process
B3
Device control
Start, stop, open hood
NOTICE Only those functions (icons) are displayed which are also possible for the current
operation.
B1
B2
B3