Note
The optional rearview camera is mounted on the rear of the car. Pay
attention to its orientation during installation. Plug the rearview camera
connector into the corresponding port of the dashcam once the
installation is completed. Adjust the position of the lens to ensure that it
aligns horizontal with the ground. Start the engine to check the video
functionality of the device.
11
3. The device will be automatically be powered on when plugged into a
12V accessory socket or cigarette lighter and received a charge (i.e.:
the vehicle is started). To turn the device on manually, press and hold the
Power button for 3 seconds until the welcome screen appears. The dash
cam will automatically start recording when powered on.
4. The red wire of the rear camera cable provides a 12 Volt power to your
rear camera. It is not necessary to connect the red wire to the power
supply. But if you want to use the parking assist function, it’s
recommended to connect to the power source of your reverse lights, so
the screen will display the image of the rear camera automatically when
the vehicle is in reverse. If you need more installation information, please
reach out to care@rexingusa.com for assistance.
Red
To Next Page
Loading...
