12
5. Plug the GPS module into the GPS port and secure the module to a
position close to A-pillar of the car. The antenna receiver side (the side
without 3M adhesive) faces the outside and the side with 3M adhesive
faces down. It should be properly secured.
Location of GPS Module
Optimum Installation Location
Power Supply Wiring Location
6. When connecting the charger to the vehicle’s 12V DC outlet, be sure to
use only a Rexing-approved charger. The charger should be at least a
2.5A charger which is designed and supplied specifically for use with your
device. Using an incompatible charger can cause serious personal injury
or damage to your device.
POWER
AV
To Next Page
Loading...
