2020 rf IDEAS Inc rfIDEAS Configuration Utility User Manual P a g e 33
BCDParity Enables the reader to output the card data in binary coded decimal where each
5 bits represent 1 2 4 8 and parity
Octal Enables the reader to output the card data in Octal
Invert Bits Inverts the bits from the card
Reverse Bits Reverses the bits from the card
Reverse Bytes Reverses the bytes from the card
Hashing Key The Hashing Key selection box allows the user to select the key they created
to use for encrypting the selected field The options are Off A or B
Digits Used to set the number of digits the reader will output for the selected field
Up arrow Click to move the highlighted field up one position
Down arrow Click to move the highlighted field down one position
Example Configuring WAVE ID Plus Reader using Extend:
1 Enable extended mode Select the card type from list and save it using Write button
Click GET ID and present the badge
To Next Page
Loading...
