Copying from the Bypass Tray
33
2
H Select [Paper Type] using {U} or {T}, and then press the {OK} key.
I Select [Thick Paper] using {U} or {T}, and then press the {OK} key.
The “
Programmed” message appears.
J Place the original, and then press the {Start} key.
K When the copy job is finished, press the {Clear Modes} key to clear the settings.
Note
❒ When copying on a small-sized envelope, align the flap to the paper guide
on the left.
Reference
p.23 “Loading Paper on the Bypass Tray”
ABU050S
To Next Page
Loading...
