Copying
38
2
B Select a preset ratio which is close to the desired ratio with [Enlarge] or [Re-
duce], and then press [Zoom].
C Specify a ratio using {U} or {T}, and then press the {OK} key.
Pressing {U} or {T} changes the ratio in increments of 1%. Pressing and hold-
ing down the relevant key changes the ratio in increments of 10%.
The “
Programmed” message appears.
D Place the original, and then press the {Start} key.
Note
❒ If you make a mistake in step
C
, readjust it using {U} or {T}.
Entering a ratio with the number keys
Select a ratio using the number keys.
A Press [R/E].
B Press [Zoom].
To Next Page
Loading...
