Ricoh Aficio 1113 - Starting the Machine; Shutting down the Machine; Turning off the Main Power

Getting Started
14
1
Starting the Machine
A
AA
A
Press the operation switch and the On indicator will light.
The display will come on.
Note
❒ If the power does not come on when the operation switch is pressed, check
the main power switch is on. If off, turn it on.
❒ During the warm-up period (less than 25 seconds), you can use the Auto
Start function. See p.34 “Auto Start”.
❒ You can set up a copy job and press the {
{{
{Start}
}}
} key while “Select Modes
and Press Start” is displayed.
❒ When “Input User Code and Press OK” appears, enter your user code.
Shutting Down the Machine
A
AA
A
Press the operation switch to make the On indicator go off and enter low
power mode.
Turning Off the Main Power
A
AA
A
Turn off the main power switch.
The main power indicator of the control panel goes off.
KirC1a_AE_F_FM.book Page 14 Friday, January 31, 2003 4:54 PM