Settings You Can Change with User Tools
53
4
Settings You Can Change with User Tools
Reference
For how to access User Tools, see p.49 “Accessing User Tools”.
System Settings
Menu Description
1. CopyCount Display The copy counter can be set to show the number of copies made
(count up) or the number of copies remaining to be made (count
down).
Note
❒
Default:
Up
2.Energy Saver Timer The machine enters low power mode automatically after a speci-
fied amount of time has passed following job completion. This
time can be set from 1 to 240 minutes.
In low power mode, power consumption is reduced by 30% com-
pared with standby mode.
Note
❒
Default:
1 minute
❒
Energy Saver might not be effective when an error message is
displayed.
3. Energy Saver Level You can select the Energy Saver level.
❖
❖❖
❖ Level 1
• Power Consumption:
reduced by about 30% compared with standby mode
• Warm-Up Time:
about 12 seconds
❖
❖❖
❖ Level 2
• Power Consumption:
reduced by about 60% compared with standby mode
• Warm-Up Time:
about 18 seconds
❖
❖❖
❖ Level 3
• Power Consumption:
reduced by about 70% compared with standby mode.
• Warm-Up Time:
about 25 seconds
Note
❒
Default:
Level 1
KirC1a_AE_F_FM.book Page 53 Friday, January 31, 2003 4:54 PM
To Next Page
Loading...
