User Tools
54
4
4. Auto Off Timer The machine turns itself off automatically to conserve energy after
a specified amount of time has passed following job completion.
This function is called “Auto Off ”. This time can be set from 1 to
240 minutes.
Note
❒ Default: 30 minutes
❒ Auto Off might not be effective when an error message is dis-
played.
❒ To return to the ready condition from Auto Off, the machine
requires the same warm-up time as the time to ready after
power on.
5. AOF(Keep it on.)
Note
❒ For details about this function, contact your service represent-
ative.
6. Special Paper Size Select the size of the paper set in the paper tray.
Note
❒ If the specified paper size differs from the size of paper actual-
ly loaded in the paper tray, a paper misfeed might occur be-
cause the paper size was not detected correctly.
Reference
p.46 “Changing the Paper Size”
7. Display Contrast You can adjust the brightness of the display.
Menu Description
KirC1a_AE_F_FM.book Page 54 Friday, January 31, 2003 4:54 PM
To Next Page
Loading...
