Ricoh Aficio 1113 - Placing Originals in the Auto Document Feeder

Placing Originals
23
2
Placing Originals in the Auto
Document Feeder
Note
❒ The original might become dirty if
it is written on with a pencil or sim-
ilar instrument.
❒ You cannot place a multi-page
original containing pages of differ-
ent sizes in the ADF. If your origi-
nal contains pages of different
sizes, use the SADF function and
place each page one at a time. Al-
ternatively, place pages one at a
time on the exposure glass.
❒ The last page should be on the bot-
tom.
❒ Do not cover the sensors with your
hand, or place objects on them. Al-
so, do not place anything on the ex-
posure glass cover as this could
cause a paper jam.
❖
❖❖
❖ ADF
1.
Sensors
Reference
For details about originals the ADF
can handle, see p.15 “Originals”.
Placing a stack of originals in the
ADF
A
AA
A
Adjust the document guide to the
original size.
B
BB
B
Place the aligned originals face
up in the ADF.
1.
Limit mark
2.
Document guide
Note
❒ Do not stack originals above the
limit mark.
❒ Straighten curls in the originals
before placing them in the ADF.
❒ To avoid multi-sheet feeds, fan
the originals before placing
them in the ADF.
When SADF mode is selected
A
AA
A
Place one original face up in the
ADF, and then press the {
{{
{Start}
}}
}
key.
KirC1a_AE_F_FM.book Page 23 Friday, January 31, 2003 4:54 PM