39
3. Troubleshooting
If Your Machine Does Not Operate As You
Want
Problem Causes Solutions
The machine instructs you to
wait.
The machine is warming up. Wait for the machine to warm-
up.
Reference
You can use Auto Start
mode during the warm up
period. See p.34 “Auto
Start”.
You cannot enter the desired
copy set number.
The number of copies exceeds
the maximum copy quantity.
You can change the maximum
copy quantity that you can
make at a time. See “1.
Max.Copy Q’ty” on p.56
“Copier Features”.
The machine instructs you to
enter the user code (eight–dig-
it number).
Users are restricted by user
management.
Enter the user codes. See p.34
“User Codes”.
The display is off. The machine is in low power
mode.
Turn on the operation switch.
The operation switch is
turned off.
The main power switch is
turned off.
Turn on the main power
switch.
Nothing happens when the
operation switch is turned on.
The main power switch is
turned off.
Turn on the main power
switch. See p.7 “Guide to
Components”.
The power cord is unplugged. Maker sure the power cord is
plugged firmly into the wall
outlet.
Misfeeds occur frequently. Copy paper size is not correct. Load paper of the proper size.
See p.46 “Changing the Paper
Size”.
KirC1a_AE_F_FM.book Page 39 Friday, January 31, 2003 4:54 PM
To Next Page
Loading...
