Troubleshooting
130
5
2 Tray Finisher
• 6: Align the arrows on the new refill with
those on the cartridge, and then push in the
refill until it clicks.
• 7: Gently push down the upper unit into
the cartridge.
• 8: Pull out the ribbon.
• 9: Hold the green lever while pushing in
the cartridge until it clicks.
• 10: Push back the staple unit, and then
close the front cover of the finisher.
• 1: Open the front cover of the finisher.
• 2: Hold the green lever while gently pull-
ing out the cartridge.
ZGJS805E
ZGJS806E
ZGJS807E
ZGJS808E
ZCAJ031E
ZCAJ040E
AdonisC3ver2_GBzenF_FM.book Page 130 Thursday, May 15, 2003 11:21 AM
To Next Page
Loading...
