27
2. Combined Function
Operations
Changing Modes
Note
❒ You cannot switch modes in any of the following situations:
• When scanning in a fax message for transmission
• During immediate transmission
• When accessing User Tools
• During interrupt copying
• During On hook dialing for fax transmission
• While scanning an original
❒ The copying screen is displayed as default after power on. You can change
this default setting. See p.51 “Function Priority”.
GMODE02E
AdonisC3ver2_GBzenF_FM.book Page 27 Thursday, May 15, 2003 11:21 AM
To Next Page
Loading...
