155
9. Specifications
Main unit
❖
❖❖
❖ Configuration:
Desktop
❖
❖❖
❖ Photosensitivity type:
OPC drum
❖
❖❖
❖ Original scanning:
One-dimensional solid scanning system through CCD
❖
❖❖
❖ Copy process:
Dry electrostatic transfer system
❖
❖❖
❖ Development:
Dry two-component magnetic brush development system
❖
❖❖
❖ Fusing:
Heating roll pressure system
❖
❖❖
❖ Resolution:
600 dpi
❖
❖❖
❖ Exposure glass:
Stationary original exposure type
❖
❖❖
❖ Original reference position:
Rear left corner
❖
❖❖
❖ Warm-up time:
From the main power switch
• Type 1: 15 seconds or less (20 °C) (When Facsimile or Printer is installed:
18 seconds or less (20 °C))
• Type 2: Less than 20 seconds (20 °C)
From the operation switch
• Type 1: Less than 10 seconds (20 °C)
• Type 2: Less than 15 seconds (20 °C)
❖
❖❖
❖ Originals:
Sheet/book/objects
❖
❖❖
❖ Maximum original size:
A3L, 11" × 17"L
AdonisC3ver2_GBzenF_FM.book Page 155 Thursday, May 15, 2003 11:21 AM
To Next Page
Loading...
