Copy Paper
169
9
❒ If you load paper of the same size in the same orientation in two or more
trays, the machine automatically shifts to the other tray when the first tray in
use runs out of paper. This function is called “Auto Tray Switching”. (How-
ever, if one tray has recycled or special paper, the settings of the other trays
must be the same for Auto Tray Switching to work.) This saves interrupting
a copy run to replenish paper when making a large number of copies. See
“General Features 1/4 Auto Tray Switching”, Copy Reference and p.55 “Tray
Paper Size: Tray 1–4”.
❒ The paper types you can select in System Settings are only general classifica-
tions. Copy quality for every kind of paper in a classification is not guaran-
teed. See p.169 “Unusable Paper” for details.
Unusable Paper
CAUTION:
Important
❒ To prevent faults, do not use any of the following kinds of paper:
• Paper for inkjet printers
• Thermal fax paper
• Art paper
• Aluminum foil
• Carbon paper
• Conductive paper
• Colored OHP transparencies
• Paper with perforated lines
• Hemmed-edge paper
❒ Do not use paper designed for inkjet printers, as these may stick to the fusing
unit and cause a misfeed.
❒ Do not use copy paper that has been already copied onto, faults could occur
if you do.
• Do not use aluminum foil, carbon paper, or similar conductive paper to avoid
a fire or machine failure.
AdonisC3ver2_GBzenF_FM.book Page 169 Thursday, May 15, 2003 11:21 AM
To Next Page
Loading...
