Ricoh Aficio 2035e - Accessing User Tools (System Settings); Changing Default Settings; Quitting User Tools

User Tools (System Settings)
50
4
Accessing User Tools (System Settings)
This section is for key operators in
charge of this machine.
User Tools allow you to change or set
defaults.
Note
❒ Operations for system settings dif-
fer from normal operations. Al-
ways quit User Tools when you
have finished. See p.50 “Quitting
User Tools”.
❒ Any changes you make with User
Tools remain in effect even if the
main power switch or operation
switch is turned off, or the {
{{
{Energy
Saver}
}}
} or {
{{
{Clear Modes}
}}
} key is
pressed.
Changing Default Settings
Note
❒ If a key operator code is already
set, the key operator code entry
display appears. Enter the key op-
erator code, and then press [OK].
See p.60 “Key Operator Code”.
A
AA
A
Press the {
{{
{User Tools/Counter}
}}
} key.
B
BB
B
Press [System Settings].
C
CC
C
Select the menu, and then press
the appropriate key.
Reference
p.47 “User Tools Menu (System
Settings)”
D
DD
D
Change settings by following in-
structions on the display panel,
and then press [OK].
Note
❒ To cancel changes made to set-
tings and return to the initial
display, press the {
{{
{User
Tools/Counter}
}}
} key.
Quitting User Tools
A
AA
A
Press the {
{{
{User Tools/Counter}
}}
} key.
Note
❒ You can also quit User Tools by
pressing [Exit].
ZCAS100E
ZCAS100E
AdonisC3ver2_GBzenF_FM.book Page 50 Thursday, May 15, 2003 11:21 AM