Ricoh Aficio 220 - Effective Term of Service Calls; Periodic Service Call; Pm Call

AUTOMATIC SERVICE CALLS
SM 2-3 A265/A256
Detailed
Descriptions
A895
2.1.2 PERIODIC SERVICE CALL
The periodic service call notifies the service station of the machine’s condition. The
call is made at a time interval programmed in the following RAM addresses:
Parameters Address (H)
Call interval: 01 through 15 months (BCD)
00: Periodic service call disabled
6803A1
Day: 01 through 31 (BCD)
6803A4
Date and time of the next call
Hour: 01 through 24 (BCD)
6803A5
To change these settings after programming, change the call interval. The machine
then automatically changes the remaining parameters by referring to the interval
and the current date and time.
2.1.3 PM CALL
If PM alarm is enabled with the base copier’s SP mode and PM call is enabled with
system switch 01, the machine will make an automatic service call when the base
copier’s PM counter reaches the PM interval.
Cross reference
•
PM service call on/off: System switch 01, bit 0
•
PM alarm setting: SP mode 5-501 (default: 120K)
2.1.4 EFFECTIVE TERM OF SERVICE CALLS
If a time limit for the effectiveness of service calls is programmed, the machine
stops making automatic service calls after the time limit.
Program the time limit at the following addresses. This function is disabled when all
of these addresses are 00(H).
Parameters Address (H)
Year: last two digits of the year (BCD) 6803AB
Month: 01 through 12 (BCD) 6803AC
Day: 01 through 31 (BCD) 6803AD