Ricoh Aficio 220 - 4 Service Tables; Bit Switch Programming (Function 01); How to Enter and Exit the Fax Service Mode; Service Level Functions

SERVICE LEVEL FUNCTIONS
SM 4-1 A265/A267
Service
Tables
A895
4. SERVICE TABLES
4.1 SERVICE LEVEL FUNCTIONS
4.1.1 HOW TO ENTER AND EXIT THE FAX SERVICE MODE
To Enter Fax Service Mode:
1. Ensure that the machine is in standby
mode.
2. Press
!"# $ %
, then hold down
&
for
more than 3 seconds.
The SP mode main menu appears.
3. Press
'
to enter the fax service mode.
To Exit Fax Service Mode:
1. Press
!
or “PrevMenu” until the SP mode
main menu appears.
2. Press the
!
key.
4.1.2 BIT SWITCH PROGRAMMING (FUNCTION 01)
1. Enter the fax service mode.
2. Press
( )
.
3. Press one of the following numbers, as
required:
) –
System bit switches
' –
Scanner bit switches
* – Pr
inter bit switches
+ – C
ommunication bit switches
, – G
3 bit switches
- – G
4 internal switches
. – G
4 parameter switches
NOTE:
1. SG3 bit switches are located under function 17.
2. An optional G4 interface is required to access the G4 internal and G4
parameter bit switches.
A895M501.BMP
A895M502.BMP
A895M503.BMP