NCU
SM 6-7 A265/A267
Replacement
Adjustment
A895
6.3 NCU
- If optional G4 or G3 interface kits are not installed -
1. Remove the rear cover.
2. Remove the FCU unit.
3. Remove the NCU assembly [A] (4 screws).
4. Remove the NCU [B] (4 screws) from the NCU assembly [A].
- When the optional G4 or G3 interface unit is also installed -
Refer to the FCU removal section.
A895R502.WMF
A895R501.WMF
[A]
[B]
To Next Page
Loading...
